
2026-10-02
In the production of lead-acid batteries, the step of filling the cells with electrolyte is critical to the final performance of the battery.Vacuum machine for dosed acid fillingis a high-precision industrial equipment designed for automated, sealed and controlled injection of sulfuric acid into battery banks. Unlike gravity or simple pumping systems, vacuum units remove air from porous separators and the active mass of the plates before supplying the electrolyte. This ensures complete wetting of the internal components, eliminates the formation of air pockets and reduces the risk of oxidation of the down conductors in the early stages of assembly.
For manufacturers looking to improve capacity and product life, choosing the right filling system determines not only conveyor speed, but also scrap rates. Nanjing Qiantan Energy Storage Technology LLC, with more than 30 years of experience in the industry and implementing turnkey projects in Russia, Iran, Turkey and other countries, integrates these systems into complex assembly lines. Understanding the technical nuances of this equipment allows engineers and buyers to optimize the production process, reducing operating costs and increasing the uniformity of characteristics of the produced EV, OPzV, CG and other batteries.
The process of dosed acid filling under vacuum is based on the physical laws of gas displacement by liquid under low pressure conditions. Traditional casting methods often face the problem of trapped air within tightly packed wafer packs. Air pockets prevent the electrolyte from penetrating into the micropores of the active mass, which leads to “dry zones”. These zones do not participate in the electrochemical reaction, reducing the useful capacity of the battery and causing local overheating during operation.
The vacuum machine solves this problem through a multi-stage cycle:
This approach provides a high degree of saturation, which is especially important for modern high-density designs, such as the CL 2V series tubular monoblocks or the high-power front terminal batteries of the HFS and CT series, where the space for the electrolyte is minimized to increase the amount of active mass.
When selecting or designing a pouring line, there are a number of technical parameters that must be taken into account that directly affect compatibility with the plant's production program. The equipment must correspond to the type of product being manufactured: starter, traction, stationary or specialized batteries.
| Parameter | Description and impact on the process | Typical values / Notes |
|---|---|---|
| Productivity (cycles/hour) | Number of battery packs processed per unit of time. Determines the line capacity. | Depends on configuration: from 60 to 300+ blocks/hour. Large plants require parallel operation of several heads. |
| Dosing accuracy | Deviation of the actual volume of acid poured from the specified value. Critical for maintaining the acid/active mass ratio. | ±1–3 ml. High precision prevents overfilling (risk of terminal corrosion) and underfilling (loss of capacity). |
| Vacuum level | The maximum vacuum created in the chamber or manifold. | Up to -0.098 MPa. Deep vacuum is necessary for AGM and Gel technologies, as well as for dense flooded structures. |
| Material of contact parts | Resistance of components in contact with sulfuric acid to chemical corrosion. | Polypropylene (PP), PVC, fluoroplastic (PTFE), ceramic nozzles. Stainless steel of special grades for frames. |
| Vapor recovery system | Captures acid mists and vapors generated during pouring. | Mandatory to comply with environmental standards and personnel safety. Integrated into the overall ventilation system of the workshop. |
| Adaptability to standard sizes | Possibility of quick changeover for different battery models. | Quick-change heads, programmable recipes in the PLC controller. Important for factories with a wide range. |
Specific parameters depend on the equipment model and customer requirements. For example, the production of maintenance-free 1S series car batteries requires a high speed and completely sealed process to prevent subsequent leakage. For stationary CP series batteries, the depth of penetration of the electrolyte into thick plates may be a priority.
The choice of casting technology is often determined by budget and product quality requirements. Below is a comparison of vacuum dispensing with traditional methods.
| Criterion | Gravity fill | Vacuum dosed filling |
|---|---|---|
| Wetting quality of plates | Low/Medium. High risk of air pockets in the lower layers. | High. Complete displacement of air, uniform distribution of electrolyte. |
| Process speed | Slow. It takes time for natural absorption. | High. A vacuum speeds up the penetration of liquid significantly. |
| Electrolyte consumption | Higher due to the need to compensate for losses and evaporation. | Optimized. Precise dosing reduces raw material consumption. |
| Impact on battery life | Reduces the service life due to the uneven density of the electrolyte in the volume of the jar. | Increases service life and cyclicity due to the homogeneity of the chemical composition. |
| Equipment cost | Low. Simple design without complex pumps or vacuum pumps. | Higher. Requires investment in automation, vacuum generators and control systems. |
| Environmental friendliness and safety | High risk of splashing and release of vapors into the open atmosphere. | Closed circuit. Minimizing acid aerosol emissions. |
Engineering conclusion:For mass production of low-end low-end batteries, the gravity method can be economically justified. However, for all industrial, traction (EV series) and specialized solutions (OPzV, HFS), vacuum filling is the technological standard. Saving on equipment in this case leads to significant losses at the stage of warranty service and complaints due to premature degradation of batteries.
Nanjing Qiantan Energy Storage Technology LLC positions itself as a full-cycle operator, which implies deep control over each stage of production. Vacuum filling systems are not isolated units; they are integrated into a single automated line along with equipment for the production of plates, mesh grids and assembly stations.
The experience of the company, which has implemented projects in China, Russia, Vietnam and Pakistan, shows that the efficiency of casting directly depends on the quality of the pre-assembly of the plate block. If the bags are assembled with irregular geometry, even an ideal vacuum will not ensure uniform filling. Therefore, the company’s specialists conduct an audit of the entire technological process, from incoming inspection of raw materials to final testing of finished products.
The company's infrastructure includes a specialized environmentally friendly processing workshop, which closes the product life cycle. The use of advanced filling systems allows not only to produce high-quality new batteries, but also to ensure stability of performance during battery reconditioning, where the accuracy of the regenerated electrolyte injection also plays a key role.
Different battery types have unique requirements for the priming process. Let's consider two typical scenarios.
Conditions:Traction batteries are subject to deep discharge cycles and high vibration loads. The active mass in them has a high density.
Technical requirements:It is necessary to ensure penetration of the electrolyte into the smallest pores of the active mass in order to maximize the contact area. Any “dry” areas will lead to sulfation and rapid failure.
Solution:Using a vacuum machine with a two-stage vacuum cycle. The first stage removes the main volume of air, the second stabilizes the pressure before injection. The dwell time is increased to ensure complete diffusion.
Risk:If the vacuum is insufficient, the internal resistance of the battery will be higher than rated, which will cause the voltage to drop under load.
Conditions:The batteries are designed to operate in harsh climatic conditions or in UPS systems where durability is important (up to 10-15 years).
Technical requirements:Dosing accuracy is critical, since excess acid can lead to squeezing out the gel or imbalance of chemical additives. The seal of the housing must be maintained.
Solution:Application of precision dosing pumps with flow feedback. The vacuum chamber is equipped with sensors to monitor the integrity of the seals.
Engineering advice:In conditions of high ambient temperatures (for example, in the regions of the Middle East or South Asia, where the company is active), the density of the electrolyte requires special adjustment. The equipment should allow flexible adjustment of the density of the acid being poured depending on the temperature conditions of the battery formation.
The query “vacuum acid filling machine: price from the manufacturer” often arises at the capital expenditure planning (CAPEX) stage. The cost of equipment varies widely and depends on the following factors:
When assessing value, it is important to consider not only the purchase price, but also the Total Cost of Ownership (TCO). Cheap equipment may require frequent seal repairs, dispenser calibrations and lead to increased product waste, which is more costly in the long run.
Selecting an acid casting equipment supplier is a strategic decision. Buyers and chief engineers should pay attention not only to price, but also to the technological expertise of the partner.
What to check when choosing:
Avoid suppliers who cannot provide detailed hydraulic diagrams or vacuum cycle diagrams. Transparency of technical documentation is a sign of reliability.
Modern equipment ensures dosing accuracy within ±1–3 ml, depending on the volume of acid being poured and the viscosity of the electrolyte. This is achieved through the use of Coriolis flow meters or high-precision closed-loop piston pumps. For most industrial batteries, this accuracy is sufficient to maintain the balance of acid and active mass.
Yes, most modern vacuum machines for dosed acid filling have a flexible changeover system. Changing the production recipe is carried out through the operator panel (HMI), where new parameters for volume, vacuum time and pressure are set. Physical changeover usually consists of replacing filling heads or adapters for the necks of cans of different sizes, which takes a minimum of time.
High-quality vacuum filling ensures uniform distribution of electrolyte throughout the entire volume of the plates. This is critical for the initial charging phase, as uniform acid density promotes uniform formation of the active substance (lead dioxide on the positive plate and lead sponge on the negative). Uneven filling leads to local overheating and undercharging of individual areas, reducing the final capacity.
Working with automated vacuum machines requires training operators in safety rules when working with sulfuric acid and the basics of servicing pneumatics and vacuum pumps. Suppliers, such as Nanjing Qiantan LLC, include in the contract personnel training, transfer of technical documentation and instructions for routine maintenance, which minimizes the risk of errors during operation.
The main attention is paid to the condition of seals, vacuum pump filters and the cleanliness of the dosing nozzles. Regular checking of the vacuum level and calibration of the dispensers should be carried out according to the maintenance schedule. The use of high-quality materials (PTFE, PP) reduces the frequency of replacing worn parts, but visual inspection for corrosion or cracks is required.
A vacuum acid filling machine is not just an auxiliary equipment, but a key element that determines the quality and competitiveness of lead-acid batteries. The transition from gravitational methods to vacuum technologies allows manufacturers to significantly reduce the percentage of defects, increase battery capacity and improve their performance characteristics.
For enterprises planning to modernize a production line or launch a new production facility, it is critical to choose equipment that is integrated into a comprehensive technological solution. Nanjing Qiantan Energy Storage Technologies LLC offers not just the supply of machines, but a full cycle of support: from auditing production needs and line design to launch, personnel training and service support. The company's global experience in Russia, Asia and the Middle East guarantees the adaptation of solutions to local conditions and standards.
If you are considering upgrading your equipment fleet or launching a new project, it is recommended to start with a technical audit of current processes or consultation on the parameters of a future line. Choosing the right filling system today is a guarantee of consistent quality for your products tomorrow.
For detailed technical documentation, integration diagrams and commercial proposals, please contact our engineers. Check out other battery solutions on our pageproducts and technological solutions.