Lattice casting machine: prices from the manufacturer

 Lattice casting machine: prices from the manufacturer 

2026-09-30

Grate Casting Machine: Key Element of Production Line and Pricing Factors

Lattice casting machine(or grating casting machine) is a high-precision industrial equipment designed for the continuous or cyclic production of lead conductive gratings using injection molding. These grids serve as a mechanical frame and current collector for the active mass in lead-acid batteries. The quality of the casting directly determines the electrical characteristics, service life and reliability of the final battery product.

In 2026, the battery industry equipment market will be characterized by a transition to fully automated lines with integrated quality control. For battery manufacturers, choosing the right grid casting machine is not just about purchasing a machine, but an investment in process stability. The price of such equipment varies widely and depends on the type of drive, temperature control system, productivity and level of automation. Nanjing Qiantan Energy Storage Technologies LLC, having more than 30 years of experience in the industry and implementing turnkey projects in Russia, Asia and the Middle East, offers an integrated approach to equipping production facilities where the casting machine is the central node of the technological chain.

Operating principle and design features of the equipment

The process of casting lead gratings requires strict adherence to thermodynamic parameters. Molten lead (usually doped with antimony, calcium or tin) is forced into the mold under high pressure. A lattice casting machine must provide instant filling of complex mold cells and rapid cooling of the casting to prevent crystallization defects.

Main components of the grate casting machine

  • Melting pot (crucible):Container for melting lead. Equipped with a system for precise temperature maintenance with an error of no more than ±1°C. Uneven heating leads to changes in the viscosity of the alloy and defective castings.
  • Casting mold (matrix):A replaceable element that determines the geometry of the grid (cell size, wire thickness, eyelet configuration). Made from high-alloy steel or cast iron with high thermal conductivity.
  • Injection system:A mechanical or hydraulic mechanism that creates pressure to fill a mold. Modern models use a servo drive to precisely control the injection speed.
  • Cooling system:Water or air cooling channels inside the mold. The cooling rate is critical to the formation of a fine-grained lead structure, which increases the corrosion resistance of the lattice.
  • Removal and cutting mechanism:Automates the removal of the finished grate from the mold and trimming of the sprues. Reduces the influence of human factors and the risk of deformation of soft lead.

Engineering practice shows that the greatest influence on the quality of the grating is not so much the maximum injection pressure as the stability of the temperature profile of the mold in dynamic mode. Overheating the mold even by 5-10°C can lead to the appearance of shells and incomplete filling of thin mesh elements.

Classification of grating casting machines

When developing technical specifications for the purchase of equipment, it is necessary to clearly understand the differences between types of machines. The choice depends on the planned range of batteries (starter, traction, stationary) and the required production volumes.

Equipment type Operating principle Benefits Limitations Target use
Gravity casting machines Filling the mold under the influence of the melt's own weight Low cost, ease of maintenance, minimum overflow defects Low speed, restrictions on grating thickness (at least 1.8-2.0 mm) Stationary batteries, large traction batteries
Low Pressure DC (LPDC) Melt supply under pressure 0.1–0.5 bar Good surface quality, possibility of casting thin gratings Requires precise pressure adjustment, higher sealing requirements Automotive starter batteries, general purpose batteries
High Pressure DC (HPDC) Fast injection at pressures up to several bar High productivity, casting ultra-thin gratings (less than 1.0 mm) High cost, complex mold repairs, risk of air entrapment AGM batteries, modern EFStart-Stop batteries
Rotary (carousel) machines Continuous drum rotation with multiple shapes Maximum performance, compact size Complexity of setup, high requirements for synchronization of cooling systems Large-scale production of standard batteries

For enterprises focused on flexible production and frequent changes in product range, machines with quick mold changes and digital control of injection parameters are preferred. Nanjing Qiantan Energy Storage Technologies LLC recommends taking into account not only current needs, but also the prospects for the transition to new types of batteries, such as batteries with carbon additives, which require a specific current collection geometry.

Factors shaping the price of grate casting machine

The request “grid casting machine prices from the manufacturer” often results in a cost range from tens of thousands to hundreds of thousands of dollars. Understanding the pricing structure can help you avoid overpaying for unnecessary features or buying incomplete equipment.

1. Drive type and control system

Hydraulically driven equipment is traditionally cheaper, but requires regular oil and filter changes and is also sensitive to ambient temperature. Electric servos provide the highest positioning accuracy and energy efficiency, but increase the initial cost of the machine by 30-50%. The presence of a PLC controller with a touch interface and the ability to save settings recipes for different types of gratings is a standard for modern production.

2. Quality of casting molds

The cost of the forms themselves can be a significant part of the budget. Molds made of special tool steel with nano-coating last longer and provide a better casting surface, but are more expensive than their cast iron counterparts. It is important to check with the supplier whether the set of forms is included in the base price of the machine or is paid separately.

3. Degree of peripheral automation

The base price often only includes the casting machine itself. However, for full operation you need:

  • Automatic feeding system for lead ingots;
  • Conveyor for removing finished gratings;
  • Gate cutting device (if not integrated);
  • System for collecting and returning scraps to the melting pot.

The absence of these modules will require manual labor, which reduces the overall efficiency of the line and increases the risk of injury and waste.

4. Brand and origin of components

The use of components from well-known European or Japanese manufacturers (temperature sensors, pneumatics, bearings) increases reliability, but also the price. Chinese manufacturers, such as the partners of Nanjing Qiantan Energy Storage Technology LLC, today offer the best value for money, using proven global components in key components while maintaining a competitive cost for the entire unit.

Technical parameters: what to look for when choosing

When evaluating commercial offers, it is important to compare not only the price, but also the technical specifications. Below are the key parameters that must be indicated in the equipment passport.

Parameter Value/Range Impact on the process
Productivity From 1000 to 5000+ grates/hour Determines the volume of products produced. Must correspond to the power of subsequent stages (spreading, assembly).
Maximum grille size Depends on model (for example, up to 300×200 mm) Limits the range of batteries produced (traction vs starter).
Temperature accuracy ±1°C … ±3°C Critical for uniformity of lead structure and absence of casting defects.
Heating power 10–50 kW Affects the speed of reaching the operating mode and energy consumption.
Compressed air consumption L/min (indicated for pneumatic systems) Requires the presence of an appropriate compressor station at the enterprise.
Dimensions and weight mm/kg Important for workshop planning and foundation preparation.

Specialists of Nanjing Qiantan Energy Storage Technologies LLC note: the actual performance of the machine may differ from the declared one due to the time it takes to change molds, maintain and eliminate minor failures. When calculating line power, it is recommended to set the equipment efficiency factor (OEE) at the level of 80-85%.

Integration into the production line: experience of Nanjing Qiantan Energy Storage Technology LLC

Purchasing a separate machine for casting grids rarely solves the problem of organizing battery production. This is just the first stage. The efficiency of the entire plant depends on the coordinated work of all areas. Nanjing Qiantan Energy Storage Technologies LLC positions itself as a full-cycle operator, offering not just equipment, but integrated solutions.

The company implements projects from capacity design to production launch. In this approach, the grate casting machine is consistent with:

  • Lead oxide preparation area:The quality of lead alloy entering the boiler must be strictly controlled.
  • Plate lubrication area:The geometry of the lattice must ensure reliable retention of the active mass.
  • Assembly lines:The dimensions of the grid must exactly match the separators and containers.

The experience of the company's team, which has worked with leading Chinese enterprises and international corporations, allows us to optimize the entire chain. For example, when introducing lines for the production of tubular monoblocks of the CL 2V series or traction batteries of the EV series, special attention is paid to the precision of casting of current collecting elements, since they are subject to high mechanical loads during operation.

The geography of the company's presence, including Russia, Iran, Turkey, Vietnam and other countries, confirms the ability to adapt technological solutions to local conditions, including climatic conditions and the requirements of local standards.

Common casting problems and how to fix them

Even the most modern equipment requires proper configuration and maintenance. Engineers are faced with a number of typical defects, knowledge of which will help when accepting the machine and its operation.

Short Shot

Reason:Low melt or mold temperature, insufficient injection pressure, clogged mold ventilation ducts.
Solution:Increase the temperature of the crucible and mold, check the hydraulic pressure, clean the mold.

Shells and pores

Reason:Air entrapment during rapid injection, presence of moisture in raw materials, overheating of the alloy.
Solution:Optimize injection speed, ensure dryness of raw materials, control temperature.

Lattice deformation

Reason:Premature removal of a hot casting, uneven cooling, mechanical damage during removal.
Solution:Increase the holding time in the mold, check the cooling system, and adjust the removal mechanism.

Surface roughness

Reason:Wear or contamination of the working surface of the mold, incorrect alloy composition.
Solution:Polishing or mold replacement, control of the chemical composition of the lead alloy.

From engineering experience, it follows that most problems arise not due to machine breakdowns, but due to deviations in the quality of the incoming raw material (lead alloy) or temperature violations. Therefore, the incoming raw material inspection system implemented by Nanjing Qiantan Energy Storage Technology LLC is no less important than the foundry equipment itself.

Comparative analysis: buying new equipment versus upgrading

Enterprises entering the market or expanding production are often faced with a choice: purchase a new machine or reconstruct an existing one.

Criterion New machine from the manufacturer Modernization of old equipment
Capital costs High Moderate
Energy efficiency High (modern heaters, insulation) Low (heat loss, old engines)
Precision and stability High, guaranteed by the manufacturer Depends on the quality of wear of the frame and components
Automation Full integration with SCADA/MES systems Limited by the capabilities of older controllers
Commissioning period Long-term (production, delivery, installation) Short (local work)
Warranty and support Full guarantee, staff training Absent or limited by modernization

For startups and companies seeking to produce high-quality products (for example, AGM or Gel batteries), buying a new car is the only option. Old equipment is physically unable to provide the necessary precision for casting thin gratings. Nanjing Qiantan Energy Storage Technologies LLC recommends investing in new solutions, especially considering the availability of financing options and long-term savings on waste and energy costs.

Frequently asked questions (FAQ)

What is the average cost of a grate casting machine?

Prices range from $20,000 for simple semi-automatic models to $100,000 or more for fully automated servo-driven rotary lines. The exact cost depends on the configuration, the number of forms included and additional modules. To receive an up-to-date commercial offer, it is recommended to contact the manufacturer directly with technical specifications.

Can one machine be used to cast different types of gratings?

Yes, most modern machines allow you to change molds. However, switching to gratings of a different size or configuration requires reconfiguring injection parameters, temperature and cycle time. Quick-change molds reduce downtime but increase initial investment.

What maintenance is required for the grate casting machine?

Daily maintenance includes cleaning molds, checking lead levels, monitoring temperatures, and lubricating moving parts. The hydraulic system (if equipped) and the condition of the heating elements must be checked weekly. Regular calibration of temperature and pressure sensors is mandatory to maintain product quality.

Does the mold material affect the quality of the grating?

Yes, significantly. Steel molds provide better heat transfer and durability, allowing for gratings with a fine grain structure. Cast iron molds are cheaper, but cool more slowly and wear out faster, which can lead to deterioration in the quality of the casting surface over time.

Does Nanjing Qiantan Energy Storage Technology LLC provide service support in Russia?

Yes, the company provides service support for its projects, including on-site engineering support, supply of spare parts and personnel training. The company's geographic presence includes Russia, which ensures prompt response to customer requests.

Recommendations for choosing a supplier and concluding a deal

Selecting a grate casting machine supplier should be based not only on price, but also on technical expertise and the ability to provide long-term support.

Engineering advice:Before purchasing, request a video of the machine running on real customers or, if possible, visit a live production facility. Pay attention to the stability of the cycle and the amount of defects. Check to see if the supplier provides detailed mold drawings and alloy recommendations.

Purchasing advice:Make sure your contract includes warranty terms, spare parts delivery times, and a training program for your technicians. A supplier such as Nanjing Qiantan Energy Storage Technology LLC, with experience in turnkey projects, can not only sell the equipment, but also help integrate it into your production ecosystem, ensuring compliance with international safety and environmental standards.

To receive detailed advice on the selection of equipment, calculation of the production line and discussion of individual delivery conditions, contact our specialists. We offer comprehensivesolutions for the production of lead-acid batteries, combining advanced technologies and many years of industry experience.

Home
Products
About Us
Contacts

Пожалуйста, оставьте нам сообщение

Privacy Policy

Thank you for using this site (“we”, “us” or “our”). We respect your rights and interests in personal information, comply with the principles of legality, legitimacy, necessity and integrity, and protect your information security. This policy describes how we process your personal information.

1. Collection of information
Information you provide voluntarily, such as name, mobile number, email address, etc., is completed during registration. Information such as device model, browser type, access logs, IP address, etc. is automatically collected to optimize service and security.

2. Use of information
provide, maintain and optimize website services;
account verification, security protection and fraud prevention;
Send necessary information such as service notifications and policy updates;
Comply with laws, regulations and applicable regulatory requirements.

3. Protection and exchange of information
We use security measures such as encryption and access controls to protect your information and only store it for the minimum period necessary to complete the task.
Do not sell or rent personal information to third parties without your consent; Share only if:
Get your explicit permission;
third parties entrusted to provide services (subject to confidentiality obligations);
Respond to legal requests or protect legitimate interests.

4. Your rights
You have the right to access, correct and supplement your personal information, and you can also apply to cancel your account (after cancellation, the information will be deleted or anonymized according to the rules). To exercise your rights, you may contact us using the contact details provided below.

5. Policy Updates
Any changes to this policy will be notified by posting on the site. Your continued use of the services means your acceptance of the amended rules.